| Section 2.2 | Improved default settings for fonts and symbols |
| Section 2.3 | Enhancements to linked viewports |
| Section 2.4 | Displaying the drawing area in full screen mode |
| Section 3.1 | Copying sets and surfaces |
| Section 3.2 | Model instancing enhancements in Abaqus/CAE |
| Section 3.3 | Bead optimization |
| Section 3.4 | Accounting for durability during a shape optimization |
| Section 3.5 | Selecting individual part instances when extracting the surface mesh from an optimization |
| Section 6.1 | Enhancements to material calibration for hyperelasticity with permanent set |
| Section 6.2 | Selecting multiple items in the Material Library Manager |
| Section 6.6 | Enhancements to the critical state (clay) plasticity model |
| Section 7.4 | Pore pressure cohesive elements |
| Section 11.1 | Using the Edit Mesh toolset to insert cohesive seams |
| Section 13.4 | New surface output variables for enriched elements |
| Section 13.5 | Integrated output over a surface in Abaqus/Standard |
| Section 13.12 | Updating locations of the minimum and maximum contour values |
| Section 13.13 | Saving X–Y data |
| Section 13.14 | Defining free body cuts |
| Section 14.9 | Plug-in for resetting midside nodes |
| Section 15.1 | Scripting command changes |