The following commands operate on Part objects. For more information about the Part object, see “Part object,” Section 37.1.
import mesh
This method assigns a stack direction to geometric cells. The stack direction will be used to orient the elements during mesh generation.
Required arguments
A sequence of Cell objects specifying regions where to assign the stack direction.
A Face object specifying the top side of the stack direction.
Optional arguments
Return value
Exceptions
This method associates a geometric entity with mesh entities that are either orphan elements, bounds orphan elements, or were created using the bottom-up meshing technique.
Required argument
A Cell, a Face, an Edge, or a Vertex object specifying geometric entity to be associated with one or more mesh entities.
If the geometric entity is a Cell object then the argument elements must be specified.
If the geometric entity is a Face object then the argument elemFaces must be specified.
If the geometric entity is an Edge object then the argument elemEdges must be specified.
If the geometric entity is a Vertex object then the argument node must be specified.
Optional arguments
A sequence of MeshElement objects specifying the elements to be associated with the geometric cell.
A sequence of MeshFace objects specifying the element faces to be associated with the geometric face.
A sequence of MeshEdge objects specifying the element edges to be associated with the geometric edge.
A MeshNode object specifying the mesh node to be associated with the geometric vertex.
Return value
Exceptions
This method creates a virtual topology feature by automatically merging faces and edges based on a set of geometric parameters. The edges and vertices that are being merged will be ignored during mesh generation.
Required arguments
Optional arguments
A sequence of Face objects specifying the domain to search for geometric entities that need to be merged. Entities identified as candidates to be merged may be merged with entities from outside the specified region. If regions is not specified then the entire part is the domain for searching geometric entities that need to be merged.
A Boolean specifying whether to merge short edges. The default value is False.
A Float specifying a threshold that determines which edges are considered to be short. These edges are the candidate entities to be merged. This argument is a required argument if the argumentmergeShortEdges equals True and it is ignored if the argument mergeShortEdges equals False.
A Boolean specifying whether to merge faces with small area. The default value is False.
A Float specifying a threshold that determines which faces are considered to have a small area. These faces are the candidate entities to be merged. This argument is a required argument if the argumentmergeSmallFaces equals True and it is ignored if the argument mergeSmallFaces equals False.
A Boolean specifying whether to merge faces with high aspect ratio. The default value is False.
A Float specifying a threshold that determines which faces are considered to have high aspect ratio. These faces are the candidate entities to be merged. This argument is a required argument if the argumentmergeSliverFaces equals True and it is ignored if the argument mergeSliverFaces equals False.
A Boolean specifying whether to merge faces that have a sharp corner angle. The default value is False.
A Float specifying a threshold that determines which face corner angles are considered to be small. These faces will be candidate entities to be merged. This argument is a required argument if the argumentmergeSmallAngleFaces equals True and it is ignored if the argument mergeSmallAngleFaces equals False.
A Boolean specifying whether to merge faces that represent a thin stair-like feature. The default value is False.
A Float specifying a threshold that determines which faces representing small stair-like features are considered thin. These faces will be candidate entities to be merged. This argument is required if the argument mergeThinStairFaces is True and it is ignored if mergeThinStairFaces is False.
A Boolean specifying whether to abstract away redundant edges and vertices. The default value is False.
A Float specifying the angle deviation from 180 degrees at a vertex or at an edge such that the two edges radiating from the vertex or the two faces bounded by the edge can be merged. The default value is 30.0 degrees.
A Boolean specifying whether to verify that blend faces can be merged with neighboring faces. If applyBlendControls is true then all faces that have angle larger than blendSubtendedAngleTolerance and a radius smaller than blendRadiusTolerance will not be merged with neighboring faces unless the neighboring faces are also blend faces with similar geometric characteristics. The default value is False.
A Float specifying the largest subtended angle of blend faces that can be merged with neighboring faces. This argument is a required argument if the argument applyBlendControls equals True and it is ignored if the argument applyBlendControls equals False.
A Float specifying the smallest radius of curvature of blend faces that can be merged with neighboring faces. This argument is a required argument if the argument applyBlendControls equals True and it is ignored if the argument applyBlendControls equals False.
Return value
A Feature object.
Exceptions
This method deletes the control parameters for boundary layer mesh for all the specified regions.
Required argument
A sequence of Cell objects specifying the regions for which to set the boundary layer mesh control parameters.
Optional arguments
Return value
Exceptions
This method deletes a subset of the mesh that contains the native elements from the given parts or regions.
Required argument
A sequence of Part objects or Region objects specifying the parts or regions from which the native mesh is to be deleted.
Optional arguments
Return value
Exceptions
This method deletes the association of geometric entities with mesh entities.
Required argument
Optional argument
A Boolean specifying whether the mesh will also be disassociated from the geometric entities that bounds the given geometricEntities. For example, if the argument geometricEntities contains a face, this boolean indicates whether the edges and vertices that bound the face will also be disassociated from the mesh. The default value is False.
Return value
Exceptions
This method deletes all boundary meshes in the parts. See the boundaryPreview argument of generateMesh for information about generating boundary meshes.
Arguments
Return value
Exceptions
This method deletes the global edge seeds from the given parts or deletes the local edge seeds from the given edges.
Required argument
A sequence of Part objects or Edge objects specifying the parts or edges from which the seeds are to be deleted.
Optional arguments
Return value
Exceptions
This method generates a mesh in the given parts or regions.
Required arguments
Optional arguments
A sequence of Part objects or Region objects specifying the parts or regions where the mesh is to be generated.
A Boolean specifying whether mesh generation is allowed to modify seed constraints. The default value is OFF.
A Boolean specifying whether mesh generation is allowed to modify the existing mesh techniques so that a compatible mesh can be generated. The default value is OFF.
A Boolean specifying whether the generated mesh should be a boundary preview mesh. This option will only have an effect if any of the specified regions are to be meshed with tetrahedral elements or using the bottom-up technique with hexahedral or wedge elements. The default value is OFF.
A Boolean specifying whether mesh generation is allowed to modify an existing boundary preview mesh. This option will only have an effect if any of the specified regions are to be meshed with tetrahedral elements and a boundary preview mesh already exists. The default value is OFF.
Return value
Exceptions
This method generates solid elements by extruding a 2D mesh along a vector, either on an orphan mesh or within a cell region using a bottom-up technique.
Required arguments
A Cell object specifying the geometric region where the mesh is to be generated. This argument is valid only for native parts.
An Int specifying the number of layers to be generated along the extrusion vector.
A sequence of sequences of Floats specifying the start point and end point of a vector. Each point is defined by a tuple of three coordinates indicating its position. The direction of the mesh extrusion operation is from the first point to the second point.
Optional arguments
At least one of the three optional "SourceSide" arguments must be specified.
A sequence of MeshFace objects specifying the faces of 3D elements to be used as the source for the extrude meshing operation.
A sequence of 2D MeshElement objects specifying the elements to be used as the source for the extrude meshing operation.
A Float specifying the distance of the mesh extrusion. If unspecified, the vector length of the extrudeVector argument is assumed.
A datum plane, a sequence of Face objects, a sequence of MeshFace objects, or a sequence of 2D MeshElement objects specifying the target of the extrude meshing operation. If specified, this argument overrides the depth argument, and all points on the source will be extruded in the direction of the extrusion vector until meeting the target.
A Float specifying a ratio of the element size in the extrusion direction between the source and the target sides of the extrusion. The default is 1.0, meaning no bias.
A Boolean specifying whether existing element sets that include source elements will be extended to also include extruded elements. This argument is ignored for native parts. The default value is False.
Return value
Exceptions
This method generates solid elements by sweeping a 2D mesh, either on an orphan mesh or within a cell region using a bottom-up technique.
Required argument
A Cell object specifying the geometric region where the mesh is to be generated. This argument is valid only for native parts.
Optional arguments
At least one of the following three arguments must be specified: geometrySourceSide, elemFacesSourceSide, or elemSourceSide.
In addition one of the following two sets of arguments must also be specified:
One of the following three arguments: geometryConnectingSides, elemFacesConnectingSides, or elemConnectingSides. In this case the targetSide is an optional argument.
targetSide and numberOfLayers.
A sequence of MeshFace objects specifying the faces of 3D elements to be used as the source for the sweep meshing operation.
A sequence of 2D MeshElement objects specifying the elements to be used as the source for the sweep meshing operation.
A sequence of MeshFace objects specifying connecting sides of the sweep meshing operation.
A sequence of 2D MeshElement objects specifying connecting sides of the sweep meshing operation.
A Face object specifying the target side of the sweep meshing operation.
An Int specifying the number of layers to be generated along the sweep direction.
A Boolean specifying whether existing element sets that include source elements will be extended to also include swept elements. This argument is ignored for native parts. The default value is False.
Return value
Exceptions
This method generates solid elements by revolving a 2D mesh around an axis, either on an orphan mesh or within a cell region using a bottom-up technique.
Required arguments
A Cell object specifying the geometric region where the mesh is to be generated. This argument is valid only for native parts.
An Int specifying the number of layers of elements to be generated around the axis of revolution.
A sequence of sequences of Floats specifying the two points of the vector that describes the axis of revolution. Each point is defined by a tuple of three coordinates indicating its position. The direction of the axis of revolution is from the first point to the second point. The orientation of the revolution operation follows the right-hand-rule about the axis of revolution.
A Float specifying the angle of revolution.
Optional arguments
At least one of the three optional "SourceSide" arguments must be specified.
A sequence of MeshFace objects specifying the faces of 3D elements to be used as the source for the revolve meshing operation.
A sequence of 2D MeshElement objects specifying the elements to be used as the source for the revolve meshing operation.
A Boolean specifying whether existing element sets that include source elements will be extended to also include extruded elements. This argument is ignored for native parts. The default value is False.
Return value
Exceptions
This method returns an edge seed parameter for a specified edge of a part.
Required arguments
An Edge object specifying the edge to be queried.
A SymbolicConstant specifying the type of edge seed attribute to return. Possible values are:
The return value is dependent on the attribute argument.
EDGE_SEEDING_METHOD
BIAS_METHOD
NUMBER
AVERAGE_SIZE
DEVIATION_FACTOR
MIN_SIZE_FACTOR
BIAS_RATIO
BIAS_MIN_SIZE
BIAS_MAX_SIZE
VERTEX_ADJ_TO_SMALLEST_ELEM
SMALLEST_ELEM_LOCATION
CONSTRAINT
If attribute=EDGE_SEEDING_METHOD, the return value is a SymbolicConstant specifying the edge seeding method used to create the seeds along the edge. Possible values are:
UNIFORM_BY_NUMBER
UNIFORM_BY_SIZE
CURVATURE_BASED_BY_SIZE
BIASED
NONE
If attribute=BIAS_METHOD, the return value is a SymbolicConstant specifying the bias type used to create the seeds along the edge. Possible values are:
SINGLE
DOUBLE
NONE
If attribute=NUMBER, the return value is an Int specifying the number of element seeds along the edge.
If attribute=AVERAGE_SIZE, the return value is a Float specifying the average element size along the edge.
If attribute=DEVIATION_FACTOR, the return value is a Float specifying the deviation factor
, where
is the chordal deviation and
is the element length. If edge seeds are not defined, the return value is zero.
If attribute=MIN_SIZE_FACTOR, the return value is a Float specifying the size of the smallest allowable element as a fraction of the specified global element size. If edge seeds are not defined, the return value is zero.
If attribute=BIAS_RATIO, the return value is a Float specifying the length ratio of the largest element to the smallest element.
If attribute=BIAS_MIN_SIZE, the return value is a Float specifying the length of the largest element; only applicable if the EDGE_SEEDING_METHOD is BIASED and seeds were specified by minimum and maximum sizes.
If attribute=BIAS_MAX_SIZE, the return value is a Float specifying the length of the largest element; only applicable if the EDGE_SEEDING_METHOD is BIASED and seeds were specified by minimum and maximum sizes.
If attribute=VERTEX_ADJ_TO_SMALLEST_ELEM, the return value is an Int specifying the ID of the vertex next to the smallest element; only applicable if the EDGE_SEEDING_METHOD is BIASED.
If attribute=SMALLEST_ELEM_LOCATION, the return value is a SymbolicConstant specifying the location of smallest elements for double bias seeds; only applicable if the EDGE_SEEDING_METHOD is BIASED and BIAS_METHOD is DOUBLE. Possible values are:
SMALLEST_ELEM_AT_CENTER
SMALLEST_ELEM_AT_ENDS
NONE
If attribute=CONSTRAINT, the return value is a SymbolicConstant specifying how close the seeds must be matched by the mesh. Possible values are:
FREE
FINER
FIXED
NONE
A value of NONE indicates that the edge is not seeded.
Optional arguments
Return value
The return value is a Float, an Int, or a SymbolicConstant depending on the value of the attribute argument.
Exceptions
This method returns the ElemType object of a given element shape assigned to a region of a part.
Required arguments
A SymbolicConstant specifying the shape of the element for which to return the element type. Possible values are:
LINE
QUAD
TRI
HEX
WEDGE
TET
Optional arguments
Return value
ElemType object.
Exceptions
TypeError
This method returns a sequence of face objects that are meshed with incompatible elements.
Required arguments
Optional argument
A sequence of cell objects which will be used to search the incompatible faces.
Return value
A sequence of Face objects.
Exceptions
This method returns a mesh control parameter for the specified region of a part.
Required arguments
A SymbolicConstant specifying the mesh control attribute to return. Possible values are:
The return value depends on the value of the attribute argument.
ELEM_SHAPE
TECHNIQUE
ALGORITHM
MIN_TRANSITION
If attribute=ELEM_SHAPE, the return value is a SymbolicConstant specifying the element shape used during meshing. Possible values are:
LINE
QUAD
TRI
QUAD_DOMINATED
HEX
TET
WEDGE
HEX_DOMINATED
If attribute=TECHNIQUE, the return value is a SymbolicConstant specifying the meshing technique to be used during meshing. Possible values are:
Where UNMESHABLE indicates that no meshing technique is applicable with the currently assigned element shape.
FREE
STRUCTURED
SWEEP
UNMESHABLE
If attribute=ALGORITHM, the return value is a SymbolicConstant specifying the meshing algorithm to be used during meshing. Possible values are:
Where NONE indicates that no algorithm is applicable.
MEDIAL_AXIS
ADVANCING_FRONT
DEFAULT
NON_DEFAULT
NONE
If attribute=MIN_TRANSITION, the return value is a Boolean indicating whether minimum transition will be used during meshing. This option is applicable only to the following:
Free quadrilateral meshing or sweep hexahedral meshing with algorithm=MEDIAL_AXIS.
Structured quadrilateral meshing.
Optional arguments
Return value
The return value is a SymbolicConstant or a Boolean depending on the value of the attribute argument.
Exceptions
TypeError
This method returns the mesh statistics for the given regions.
Required argument
A sequence or tuple of Geometry regions for which mesh statistics should be returned.
Optional arguments
Return value
A MeshStats object.
Exceptions
This method returns a part seed parameter for the part.
Required argument
A SymbolicConstant specifying the type of part seed attribute to return. Possible values are:
The return value depends on the value of the attribute argument.
SIZE
DEFAULT_SIZE
DEVIATION_FACTOR
MIN_SIZE_FACTOR
If attribute=SIZE, the return value is a Float specifying the assigned global element size. If part seeds are not defined, the return value is zero.
If attribute=DEFAULT_SIZE, the return value is a Float specifying a suggested default global element size based upon the part geometry.
If attribute=DEVIATION_FACTOR, the return value is a Float specifying the deviation factor
If attribute=MIN_SIZE_FACTOR, the return value is a Float specifying the size of the smallest allowable element as a fraction of the specified global element size. If part seeds are not defined, the return value is zero.
Optional arguments
Return value
The return value is a Float that depends on the value of the attribute argument.
Exceptions
An exception occurs if the part does not contain native geometry.
This method returns all geometric regions in the part that require a mesh for submitting an analysis but are either unmeshed or are meshed incompletely.
Arguments
Return value
A Region object, or None.
Exceptions
This method creates a virtual topology feature. Virtual topology allows unimportant entities to be ignored during mesh generation. You can combine two adjacent faces by specifying a common edge to ignore. Similarly, you can combine two adjacent edges by specifying a common vertex to ignore.
Required argument
A sequence of vertices and edges specifying the entities to be ignored during meshing.
Optional arguments
Return value
A Feature object.
Exceptions
This method restores vertices and edges that have been merged using a virtual topology feature.
Required argument
A sequence of IgnoredVertex objects and IgnoredEdge objects specifying the entities to be restored.
Optional arguments
Return value
A Feature object.
Exceptions
This method seeds the given edges nonuniformly using the specified number of elements and bias ratio or the specified minimum and maximum element sizes.
Required arguments
A SymbolicConstant specifying whether single- or double-biased seed distribution will be applied. If unspecified, single-biased seed distribution will be applied. Possible values are:
SINGLE: Single-biased seed distribution will be applied.
DOUBLE: Double-biased seed distribution will be applied.
A sequence of Edge objects specifying the edges to seed. The smallest elements will be positioned near the end where the normalized curve parameter=0.0. You must provide either the end1Edges or the end2Edges argument or both when biasMethod=SINGLE and omit both of them when biasMethod=DOUBLE.
Note: You can determine which end is which by the order of the vertex indices returned by “getVertices,” Section 7.3.10.
A sequence of Edge objects specifying the edges to seed. The smallest elements will be positioned near the end where the normalized curve parameter=1.0.
A sequence of Edge objects specifying the edges to seed. The smallest elements will be positioned near edge center. You must provide either the centerEdges or the endEdges argument or both when biasMethod=DOUBLE and omit both of them when biasMethod=SINGLE.
A sequence of Edge objects specifying the edges to seed. The smallest elements will be positioned near edge ends.
A Float specifying the ratio of the largest element to the smallest element. Possible values are 1.0
ratio
An Int specifying the number of elements along each edge. Possible values are 1
A Float specifying the desired smallest element size.
A Float specifying the desired largest element size.
Note: You must specify either the ratio and number or minSize and maxSize pair of arguments.
Optional argument
A SymbolicConstant specifying how closely the seeds must be matched by the mesh. The default value is FREE. If unspecified, the existing constraint will remain unchanged. Possible values are:
FREE: The resulting mesh can be finer or coarser than the specified seeds.
FINER: The resulting mesh can be finer than the specified seeds.
FIXED: The seeds must be exactly matched by the mesh (only with respect to the number of elements, not to the nodal positioning).
Return value
Exceptions
This method seeds the given edges uniformly based on the number of elements along the edges.
Required arguments
A sequence of Edge objects specifying the edges to seed.
An Int specifying the number of elements along each edge. Possible values are 1
Optional argument
A SymbolicConstant specifying how closely the seeds must be matched by the mesh. The default value is FREE. If unspecified, the existing constraint will remain unchanged. Possible values are:
FREE: The resulting mesh can be finer or coarser than the specified seeds.
FINER: The resulting mesh can be finer than the specified seeds.
FIXED: The seeds must be exactly matched by the mesh (only with respect to the number of elements, not to the nodal positioning).
Return value
Exceptions
This method seeds the given edges either uniformly or following edge curvature distribution, based on the desired element size.
Required arguments
A sequence of Edge objects specifying the edges to seed.
A Float specifying the desired element size.
Optional arguments
A Float specifying the deviation factor
A Float specifying the size of the smallest allowable element as a fraction of the specified global element size.
A SymbolicConstant specifying how closely the seeds must be matched by the mesh. The default value is FREE. If unspecified, the existing constraint will remain unchanged. Possible values are:
FREE: The resulting mesh can be finer or coarser than the specified seeds.
FINER: The resulting mesh can be finer than the specified seeds.
FIXED: The seeds must be exactly matched by the mesh (only with respect to the number of elements, not to the nodal positioning).
Return value
Exceptions
This method assigns global edge seeds to the given parts.
Required argument
A Float specifying the desired global element size for the edges.
Optional arguments
A Float specifying the deviation factor
A Float specifying the size of the smallest allowable element as a fraction of the specified global element size.
A SymbolicConstant specifying how closely the seeds must be matched by the mesh. The default value is FREE. If unspecified, the existing constraint will remain unchanged. Possible values are:
FREE: The resulting mesh can be finer or coarser than the specified seeds.
FINER: The resulting mesh can be finer than the specified seeds.
Return value
Exceptions
This method sets the control parameters for boundary layer mesh for the specified regions.
Required arguments
A sequence of Cell objects specifying the regions for which to set the boundary layer mesh control parameters.
A Float specifying the height of the first element layer off boundary. Possible values are 0.0
firstElemSize
A Float specifying the ratio of heights of any two consecutive element layers. Possible values are 1.0
An Int specifying the number of element layers to be generated. Possible values are 1
Optional arguments
A sequence of Face objects specifying the faces where boundary layer should not be generated. By default, boundary layer mesh will be generated on all faces of the selected regions.
A String specifying a unique name for a set that will contain boundary layer elements.
Return value
Exceptions
This method assigns element types to the specified regions.
Required arguments
A sequence of Geometry regions or MeshElement objects, or a Set object containing either geometry regions or elements, specifying the regions to which element types are to be assigned.
A sequence of ElemType objects, one for each element shape applicable to the regions.
Note: If an ElemType object has an UNKNOWN_xxx value for elemCode, its order will be deduced from the order of other valid ElemType objects within the same setElementType command. If no valid ElemType objects can be found, the order will remain unchanged.
Optional arguments
Return value
Exceptions
As a result of the element assignment, a region must have the same library, family, and order for all its assigned element types. Otherwise, an exception will be thrown.
For example, suppose the Hex, Wedge, and Tet elements previously assigned to a cell are all linear. The user now constructs an ElemType object with a quadratic Hex element and includes only this object in the setElementType command. An exception will be thrown because the Wedge and Tet elements will remain linear (i.e., As Is) and become incompatible with the newly assigned quadratic Hex element.
This method sets the logical corners for a mappable face region.
Required arguments
A Face region.
Three, four, or five Vertex objects defining the logical corners for a given mappable face region.
Optional arguments
Return value
Exceptions
This method sets the mesh control parameters for the specified regions.
Required argument
A sequence of Face or Cell regions specifying the regions for which to set the mesh control parameters.
Optional arguments
A SymbolicConstant specifying the element shape to be used for meshing. The default value is QUAD for Face regions and HEX for Cell regions. If unspecified, the existing element shape will remain unchanged. Possible values are:
QUAD: Quadrilateral mesh.
QUAD_DOMINATED: Quadrilateral-dominated mesh.
TRI: Triangular mesh.
HEX: Hexahedral mesh.
HEX_DOMINATED: Hex-dominated mesh.
TET: Tetrahedral mesh.
WEDGE: Wedge mesh.
A SymbolicConstant specifying the mesh technique to be used. The default value is FREE for Face regions. For Cell regions the initial value depends on the geometry of the regions and can be STRUCTURED, SWEEP, or “unmeshable.” If unspecified, the existing mesh technique(s) will remain unchanged. Possible values are:
FREE: Free mesh technique.
STRUCTURED: Structured mesh technique.
SWEEP: Sweep mesh technique.
BOTTOM_UP: Bottom-up mesh technique. Only applicable for cell regions.
SYSTEM_ASSIGN: Allow the system to assign a suitable technique. The actual technique assigned can be STRUCTURED, SWEEP, or “unmeshable.”
A SymbolicConstant specifying the algorithm used to generate the mesh for the specified regions. Possible values are MEDIAL_AXIS, ADVANCING_FRONT, and NON_DEFAULT. If unspecified, the existing value will remain unchanged. This option is applicable only to the following:
Free quadrilateral or quadrilateral-dominated meshing. In this case the possible values are MEDIAL_AXIS and ADVANCING_FRONT.
Sweep hexahedral or hexahedral-dominated meshing. In this case the possible values are MEDIAL_AXIS and ADVANCING_FRONT.
Free tetrahedral meshing. In this case the only possible value is NON_DEFAULT, and it indicates that the free tetrahedral-meshing technique available in Abaqus 6.4 or earlier will be used. If algorithm is not specified, the default tetrahedral-meshing technique will be used.
A Boolean specifying whether minimum transition is to be applied. The default value is ON. If unspecified, the existing value will remain unchanged. This option is applicable only in the following cases:
Free quadrilateral meshing or hexahedral sweep meshing with algorithm=MEDIAL_AXIS.
Structured quadrilateral meshing.
A SymbolicConstant specifying element size growth to be applied when generating the interior of a tetrahedral mesh. Possible values are MODERATE and MAXIMUM. If unspecified, the existing value will remain unchanged. This option only applies to the default tetrahedral mesher.
A Boolean specifying whether mapped meshing can be used to replace the selected mesh technique. The allowMapped argument is applicable only in the following cases:
Free triangular meshing.
Free quadrilateral or quadrilateral-dominated meshing with algorithm=ADVANCING_FRONT.
Hexahedral or hexahedral-dominated sweep meshing with algorithm=ADVANCING_FRONT.
Free tetrahedral meshing. allowMapped=True implies that mapped triangular meshing can be used on faces that bound three-dimensional regions.
Return value
Exceptions
This method sets the sweep path for a sweepable region or the revolve path for a revolvable region.
Required arguments
A sweepable region.
An Edge object specifying the sweep or revolve path.
A SymbolicConstant specifying the sweep sense. The sense will affect only how gasket elements will be created; it will have no effect if gasket elements are not used. Possible values are FORWARD or REVERSE.
If sense=FORWARD, the sense of the given edge's underlying curve will be used.
Optional arguments
Return value
Exceptions
This method tests the mesh quality of a part and returns poor-quality elements.
Required argument
A SymbolicConstant specifying the criterion used for the quality check. Possible values are:
ANALYSIS_CHECKS
When this criterion is specified Abaqus/CAE will invoke the element quality checks included with the input file processor for Abaqus/Standard and Abaqus/Explicit.
ANGULAR_DEVIATION
The maximum amount (in degrees) that an element's face corner angles deviate from the ideal angle. The ideal angle is 90° for quadrilateral element faces and 60° for triangular element faces. Elements with an angular deviation larger than the specified threshold will fail this test.
ASPECT_RATIO
The ratio between the lengths of the longest and shortest edges of an element. Elements with an aspect ratio larger than the specified threshold will fail this test.
GEOM_DEVIATION_FACTOR
The largest geometric deviation factor evaluated along any of the element edges associated with geometric edges or faces. The geometric deviation factor along an element edge is calculated by dividing the maximum gap between the element edge and its associated geometry by the length of the element edge. Elements with a geometric deviation factor larger than the specified threshold will fail this test.
LARGE_ANGLE
The largest corner angle on any of an element's faces. Elements with face angles larger than the specified threshold (in degrees) will fail this test.
LONGEST_EDGE
The length of an element's longest edge. Elements with an edge longer than the specified threshold will fail this test.
MAX_FREQUENCY
An estimate of an element's contribution to the initial maximum allowable frequency for Abaqus/Standard analyses. This calculation requires appropriate section assignments and material definitions. Elements whose maximum allowable frequency is smaller than the given value will fail this test.
SHAPE_FACTOR
The shape factor for triangular and tetrahedral elements. This is the ratio between the element area or volume and the optimal element area or volume. Elements with a shape factor smaller than the specified threshold will fail this test.
SHORTEST_EDGE
The length of an element's shortest edge. Elements with an edge shorter than the specified threshold will fail this test.
SMALL_ANGLE
The smallest corner angle on any of an element's faces. Elements with face angles smaller than the given value (in degrees) will fail this test.
STABLE_TIME_INCREMENT
An estimate of an element's contribution to the initial maximum stable time increment for Abaqus/Explicit analyses. This calculation requires appropriate section assignments and material definitions. Elements that require a time increment smaller than the given value will fail this test.
Optional arguments
A Float value used to determine low quality elements according to the specified criterion. This argument is ignored when the ANALYSIS_CHECKS criterion is used. For other criterion, if this argument is unspecified then no list of failed elements will be returned.
A SymbolicConstant specifying an element shape for limiting the query. Possible values are LINE, QUAD, TRI, HEX, WEDGE, and TET.
A sequence of Region or MeshElement objects. If you do not specify the regions argument, the entire part mesh is considered.
Return value
A Dictionary object containing values for some number of the following keys: failedElements, warningElements, naElements (sequences of MeshElement objects); numElements (Int); average, worst (Float); worstElement (MeshElement object)
Exceptions