The TemperatureBCState object stores the propagating data for a temperature boundary condition in a step. One instance of this object is created internally by the TemperatureBC object for each step. The instance is also deleted internally by the TemperatureBC object.
The TemperatureBCState object has no constructor or methods.
The TemperatureBCState object is derived from the BoundaryConditionState object.
import load mdb.models[name].steps[name].boundaryConditionStates[name]
The TemperatureBCState object has the following members:
A Float specifying the temperature magnitude.
A SymbolicConstant specifying the propagation state of the temperature magnitude. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the dof member. Possible values are SET and UNCHANGED.
A tuple of Ints specifying the degrees of freedom to which the boundary condition is applied.
A SymbolicConstant specifying the propagation state of the amplitude reference. Possible values are UNSET, SET, UNCHANGED, FREED, and MODIFIED.
A SymbolicConstant specifying the propagation state of the BoundaryConditionState object. Possible values are:
NOT_YET_ACTIVE
CREATED
PROPAGATED
MODIFIED
DEACTIVATED
NO_LONGER_ACTIVE
TYPE_NOT_APPLICABLE
INSTANCE_NOT_APPLICABLE
PROPAGATED_FROM_BASE_STATE
MODIFIED_FROM_BASE_STATE
DEACTIVATED_FROM_BASE_STATE
BUILT_INTO_MODES
A String specifying the name of the amplitude reference. The String is empty if the boundary condition has no amplitude reference.
| *BOUNDARY (degree of freedom: 11 for solids; 11, 12, etc. for shells) |